Every homeowner wants to maintain a functional and comfortable home. And from time to time that means undertaking some home maintenance. Before you start, read this article which offers recommendations on safety tips for home repairs.
Recommended safety tips for home repairs
Over 26 million households perform home repairs annually, which includes maintenance and improvement projects. Despite the fact that most of these projects succeed without incident, there is always a risk of injury. Therefore, all homeowners should follow a few safety tips to avoid dangerous accidents while home repairs. If you are planning to work on your property, remember that the tips below can help you prevent injuries and enjoy your projects even more.
Wear appropriate protective gear
Wearing protective clothing, such as overalls, gloves and goggles, will help protect your skin from contact with hazardous materials or rough surfaces. You should also wear sturdy shoes that provide good traction and ankle support. If there’s a chance that you’ll be working in wet conditions, wear waterproof boots or shoes.
Wear prescription safety glasses
Wear eye protection when using power tools or performing any other activity that might result in flying debris. Prescription safety glasses will protect against dust particles and small pieces of wood or metal that could cause injury if they made contact with your eyes.
Wear protective clothing
When doing any kind of repair work, it’s important to wear protective clothing. This will keep you from getting cut or burned by sharp objects, as well as protect you from chemicals and dust. Look for clothing that’s flame-retardant and durable enough to withstand rough treatment. If possible, wear a face mask when working around chemicals or dust particles.
Turn off the gas
If you have gas lines in your home, it’s important to know where they are and how to shut them off. If you smell gas or hear a hissing sound, immediately leave the house and call your utility company or fire department for assistance.
Shut off all electricity in the work area
Shut off all electricity in the work area. If you’re working with electricity, make sure you shut off the power at the circuit breaker or fuse box before doing any work. It’s also a good idea to use rubber gloves when handling electrical wires or fixtures.
Know how to safely use power tools
Power tools can be dangerous if they’re not properly used, so it’s important that you know how to use them correctly before starting any project. For example, when using a drill or saw, always wear protective goggles and gloves and make sure that your work area is well-lit and free of clutter. Also, unplug any power tools before checking their oil levels or changing blades or bits — this can cause serious injury if there are sparks from an exposed motor housing on a drill press or table saw.
Keep all tools and supplies in good working order
Make sure that your tools are sharp and clean, as well as properly stored so they don’t get damaged or dirty. Having the right tools and knowing how to use them properly will make the job easier and faster.
Tidy up when you’re done
Before you put away tools and supplies, clean up the area where you worked. Sweep the floor or vacuum it if there are a lot of sawdust particles or other debris on the floor. Use a damp sponge to wipe up any spills or drips, then dry them with a clean cloth before putting away tools and supplies.
Final thoughts on safety tips for home repairs
With these safety tips in mind, you should be able to tackle just about any home repair project on your own. Remember that with the correct knowledge, skills, and the right safety equipment, almost any job is possible.